BSZPZ - 52100 SILATHANE ALKYD ENAMEL SEMI-GLOSS WHITE
- MSDS: BSZPZ
- Manufacturer: BRUNING PAINT CO INC
- Product Name: 52100 SILATHANE ALKYD ENAMEL SEMI-GLOSS WHITE
- National Stock Number: 8010-00F032469
Product Identification
Product ID:52100 SILATHANE ALKYD ENAMEL SEMI-GLOSS WHITE
MSDS Date:07/12/1993
FSC:8010
NIIN:00F032469
MSDS Number: BSZPZ
Responsible Party
BALTIMORE, MD 21224-4347
US
Emergency Phone: 301-342-3636AM/301-342-3641PM
Info Phone: 301-342-3636AM/301-342-3641PM
Cage: EO376
Contractor
Telephone: 800-368-2076
Cage: 85520
Ingredients
STODDARD SOLVENT (PETROLEUM DISTILLATE), MINERAL SPIRITS
CAS: 8052-41-3
RTECS: WJ8925000
Fraction By Weight: 20-25%
OSHA PEL 500 PPM
ACGIH TLV: 100 PPM
ALIPHATIC PETROLEUM DISTILLATE *93-4*
CAS: 64742-38-7
Fraction By Weight: 7.5-10%
OSHA PEL 2625 MG/CUM
ACGIH TLV: 525 MG/CUM
PIGMENT
10.4
RTECS: 9999999WG
3.401 LBS/GAL
RTECS: 9999999VO
Hazards
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHALATION: NOSE, THROAT & EYE
IRRITATION, CENTRAL NERVOUS SYSTEM DEPRESSANT, MUCOUS MEMBRANE
IRRITATION. REPEATED/PROLONGED OVEREXPOSURE TO SOLVENTS: PERMANENT
BRAIN & NERVOUS SYSTEM DAMAGE.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:INHALATION: DIZZINESS, HEADACHE, INTOXICATION,
EUPHORIA, UNCONSCIOUSNESS.
First Aid
First Aid:EYES: FLUSH W/LUKE WARM WATER FOR 15 MINS. SKIN: FLUSH
W/PLENTY OF LUKE WARM WATER. REMOVE CONTAMINATED CLOTHING PROMPTLY.
INHALATION: REMOVE TO FRESH AIR. RESTORE BREATHING IF REQUIRED.
INGESTION: RI NSE MOUTH IMMEDIATELY. GIVE 6-8 OUNCES OF LIQUID.
NEVER GIVE ANYTHING BY MOUTH IF UNCONSCIOUS. DON'T INDUCE VOMITING
UNLESS ADVISED BY PHYSICIAN. OBTAIN MEDICAL ATTENTION IN ALL CASES.
Fire Fighting
Flash Point Method:TCC
Flash Point:104F
Lower Limits:0.9%
Upper Limits:7
Extinguishing Media:NFPA CLASS B
Fire Fighting Procedures:WATER MAY BE INEFFECTIVE, BUT MAY BE USED TO
COOL CLOSED CONTAINERS EXPOSED TO EXTREME HEAT. FOG NOZZLES ARE
PREFERABLE.
Unusual Fire/Explosion Hazard:COOL CONTAINERS TO PREVENT PRESSURE
BUILDUP, POSSIBLE AUTOIGNITION OR EXPLOSION WHEN EXPOSED TO EXTREME
HEAT.
Accidental Release
Spill Release Procedures:STOP &/OR CONTAIN IF SAFE TO DO SO. KEEP ALL
IGNITION SOURCES AWAY. VENTILATE AREA. USE NON-SPARKING TOOLS FOR
CLEAN-UP. COVER W/INERT MATERIAL TO REDUCE FUMES. KEEP OUT OF
DRAINS, SEWERS OR WATERWAYS . CALL SPILL RESPONSE TEAMS IF LARGE
SPILL.
Handling
Handling and Storage Precautions:KEEP FROM FREEZING. DON'T STORE >120F.
CLOSED CONTAINER AFTER EACH USE. NEVER USE WELDING/CUTTING TORCH
ON/NEAR CONTAINER (EVEN EMPTY).
Other Precautions:DON'T TAKE INTERNALLY. KEEP OUT OF REACH OF CHILDREN.
AVOID SKIN & EYE CONTACT. AVOID PROLONGED/REPEATED BREATHING OF
VAPORS.
Exposure Controls
Respiratory Protection:OUTDOOR/OPEN AREAS: NIOSH/MSHA APPROVED
MECHANICAL FILTER RESPIRATOR FOR SOLID AIRBORNE PARTICLES.
RESTRICTED VENTILATION AREAS: CHEMICAL-MECHANICAL FILTER FOR
COMBINATION PARTICULATE GAS/VAPOR. CONFI NED AREAS: AIR LINE TYPE
RESPIRATOR/HOOD
Ventilation:GENERAL DILUTION OR LOCAL EXHAUST IN VOLUME & PATTERN TO
KEEP BELOW TLV
Protective Gloves:NATURAL RUBBER/NEOPRENE/BUNA N/NITRILE
Eye Protection:GOGGLES
Other Protective Equipment:APRON
Work Hygienic Practices:REMOVE/LAUNDER CONTAMINATED CLOTHING BEFORE
REUSE. WASH HANDS THOROUGHLY BEFORE EATING & USING WASHROOM.
Supplemental Safety and Health
INTENTIONAL MISUSE BY DELIBERATELY CONCENTRATING & INHALING THE
CONTENTS MAY BE HARMFUL OR FATAL. THIS PRODUCT CONTAINS PIGMENTS
WHICH MAY BECOME A DUST NUISANCE WHEN REMOVED BY ABRASIVE BLASING,
SAND ING OR GRINDING.
Chemical Properties
Boiling Pt:B.P. Text:300-416F
Vapor Pres:2
Vapor Density:>1
Evaporation Rate & Reference:SLOWER THAN BU AC
Percent Volatiles by Volume:52.56
Stability
Stability Indicator/Materials to Avoid:YES
STRONG ACIDS
Stability Condition to Avoid:SPARKS, OPEN FLAME, HOT SURFACES & OTHER
IGNITION SOURCES
Hazardous Decomposition Products:CO, CO2, OXIDES OF NITROGEN
Disposal
Waste Disposal Methods:DON'T FLUSH TO SEWER, WATERSHED OR WATERWAY.
DISPOSE OF IN ACCORDANCE W/FEDERAL, STATE & LOCAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.